Supportshowcfgdisable - Brocade Communications Systems 1606 Command Reference Manual

2

supportShowCfgDisable

supportShowCfgDisable
Disables a group of commands under the supportShow command.
Synopsis supportshowcfgdisable os | exception | port | fabric | services | security | network | portlog |
systemextend | filter | perfmon | ficon | iswitch | asic_db |iscsi | ficon | ag | dce_hsl | crypto |
fcip
Description Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
os
exception
port
fabric
services
security
network
portlog
system
extend
filter
perfmon
ficon
iswitch
asic_db
iscsi
ag
dce_hsl
crypto
fcip
Examples To disable the OS group of commands under the supportShow command:
See Also supportShow, supportShowCfgEnable, supportShowCfgShow
844
Disables the OS group commands.
Disables the exception group commands.
Disables the port group commands.
Disables the fabric group commands.
Disables the service group commands.
Disables the security group commands.
Disables the network group commands.
Disables the portlog group commands.
Disables the system group commands.
Disables the extend group commands.
Disables the filter group commands.
Disables the Performance Monitor group commands
Disables the FICON group commands.
Disables the FC Router group commands.
Disables the ASIC DB group commands.
Disables the iSCSI group commands.
Disables the Access Gateway group commands.
Disables the DCE group commands.
Disables the encryption group commands
Disables the FCIP group commands.
switch:admin> supportshowcfgdisable os
Config update Succeeded
Fabric OS Command Reference
53-1001337-01