Brocade Communications Systems 1606 Command Reference Manual page 165

--import
Fabric OS Command Reference
53-1001337-01
host_username
Specifies the user name for the host. Depending on your host
configuration, the command may prompt for a password.
host_file_path Specifies the fully qualified path to the file on the host to which the file is
to be exported. This includes the file name. Make sure to name your
certificates so you can track the file type and the originator switch, for
example, name_cpcert.pem.
-usb Exports a specified certificate to a mounted USB storage device. When -usb is
specified, the following operands are required:
dest_filename Specifies the name of the file on the USB device to which the file is to be
exported. The file is stored in a predetermined default directory on the
storage device.
Specify one of the following certificates to be exported. Certificates must be
specified by file type. Referring to certificates by file name is not permitted.
These file types are valid both with the -scp and with the -usb options.
-dhchallenge vault_IP_address
Exports the DH Challenge file for the specified key vault.
-currentMK Exports the current master key file.
-KACcert Exports the KAC certificate.
-KACcsr Exports the certificate sign request file. Use cryptocfg –-reg –KACcert to
register the certificate on the node after it has been signed and
re-imported. This procedure must be performed for all nodes that
participate in a two-way certificate exchange-based authentication
mechanism with key vaults. Two-way certificate exchange is supported
only for the RKM, HP SKM, and NCKA key vaults.
-CPcert Exports the member node CP certificate.
Imports a certificate from a specified external host or from a mounted USB
storage device to a predetermined directory on the local encryption switch or
blade. This command is valid on all nodes.
Files to be imported include member node CP certificates and key vault
certificates. Use the cryptocfg --show -file -all command to view all imported
files. The following operands are supported with the --import command:
-scp Imports a specified certificate from an external host using the secure copy
(SCP) protocol. When -scp is specified, the following operands are required:
local_name Specifies the name to be assigned to the imported certificate. This is a
user-generated file name.
host_IP | host_name
Specifies the IP address or name of the host from which to import the
file. To specify the host by name, it must first be configured with
dnsconfig.
host_username
Specifies the user name for the host. Depending on your host
configuration, this command may prompt for a password.
2
cryptoCfg
135