Brocade Communications Systems 1606 Command Reference Manual page 493

cost
Examples To display the link costs for all ports on a switch:
To set the ISL cost on a port:
To display the new cost value on the same port:
To delete the cost value and reset to default:
To display the change:
See Also interfaceShow, lsDbShow, topologyShow, uRouteShow, fcrRouterPortCost
Fabric OS Command Reference
53-1001337-01
Specifies the static cost of the link connected to the specified port. Valid
values are 0 to 65,535. Assigning a value outside this range will fail and
generate an error. A value of 0 removes the static cost and the port reverts to
its default link cost. If cost is not specified, the command displays the current
cost of the specified port.
switch:admin> linkcost
Slot Interface
--------------------------------------
2 0
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
2 9
2 10
2 11 (E_PORT)
2 12
2 13
2 14
2 15
Type <CR> to continue, Q<CR> to stop:
switch:admin> linkcost 2/4 500
switch:admin> linkcost 2/4
Interface2/4
switch:admin> linkcost 2/4 0
switch:admin> linkcost 2/4
Interface2/4
Cost
500 (STATIC)
1000
500 (STATIC)
200 (STATIC)
1000
1000
1000
1000
1000
1000
1000
2000 (STATIC)
1000
1000
1000
1000
Cost 500 (STATIC)
Cost 1000
2
linkCost
463