Brocade Communications Systems 1606 Command Reference Manual page 729

ve_port
all
fciptunnel
fcipcircuit
xtun
Fabric OS Command Reference
53-1001337-01
Displays information for a single specified FCIP tunnel. On the Brocade
7800/FX8-24 specify the VE_Port number associated with the tunnel
configured on one of the GbE ports. VE_Ports are numbered 16-23 on the
Brocade 7800 and 12 - 31 on theBrocade FX8-24 blade.
Displays information for all configured FCIP tunnels.
Displays configuration and status per FCIP tunnel. The following operands are
supported with fciptunnel and fcipcircuit.
-c | --circuit Displays the FCIP circuits within the tunnel This operand can be used with any
other operand to include circuit displays.
-t | --tcp Displays the TCP statistics for the circuit The -c option must be specified
with this option.
-p | --perf Displays additional performance information for the specified FCIP tunnels.
-q | --qos Displays the QoS statistics including performance for each priority. This
operand is optional with the --perf option.
-h | --hier Displays the FCIP Tunnel hierarchy listing basic circuit IDs and TCP connection
information for the tunnel.
Displays FCIP circuit configuration and status. The following operands are
supported with portShow fcipcircuit:
circuit_ID Specifies a single circuit within the FCIP tunnel. The circuit ID is an integer
value between 1-19 on the Brocade FX8-24 and 1-7 on the Brocade 7800.
This operand is required.
-t | --tcp Displays the TCP statistics for the specified circuit.
-p | --perf Displays additional performance information for the specified FCIP circuit.
-q | --qos Displays the QoS statistics including performance for each priority. This
operand is optional with the --perf option.
Displays FICON and FCP emulation statistics and current runtime conditions
for a specified set of parameters. The following arguments are supported:
-fcp Displays the SCSI Fastwrite/Tape Pipelining command sub-menu. The syntax
for -fcp is as follows:
portshow xtun [slot/]\ve_port -fcp [level] [command] [param] [options]
The following optional operands are supported with -fcp to display FCP
emulation statistics and status information; if omitted, data for all operands
is displayed.
-help Displays the command usage.
level Specifies the level for which information is displayed. You may specify one or
more of the following levels. With each additional level, this command
generates progressively more information.
-port Displays data at the port level.
2
portShow
699