Brocade Communications Systems 1606 Command Reference Manual page 625

Examples To add an ARP entry:
To create an FCIP tunnel using an IPV4 address:
To create an FCIP tunnel using IPV6:
To modify an FCIP tunnel:
To create an FCIP tunnel with VC QoS mapping (default) turned on:
To modify the default VC QoS map settings for VC 1:
To return the VC QoS map settings to default values:
To create an FCIP tunnel with VLAN tagging:
To modify an existing FCIP tunnel with VLAN tagging:
To create an FCIP tunnel with Fastwrite and read/write Tape Pipelining enabled:
To enable Fastwrite and read/write Tape Pipelining on an existing tunnel:
To create a tunnel with Byte Streaming enabled:
To enable Byte Streaming on an existing tunnel:
Fabric OS Command Reference
53-1001337-01
switch:admin> portcfg arp ge0 add 192.168.255.25 00:01:02:03:04:60
Operation Succeeded
switch:admin> portcfg fciptunnel ge0 create 2 192.168.255.2 192.168.255.20 100000
Operation Succeeded
switch:admin> portcfg fciptunnel 8/ge0 create 0 4000::1234 2000::800:3333:1234 0
Operation Succeeded
switch:admin> portcfg fciptunnel 3/ge0 modify 6 -b 100000 -c 1
Operation Succeeded
switch:admin> portcfg fciptunnel ge1 create 1 192.168.200.109 192.168.200.108 0 -M
switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 29
switch:admin> portcfg fciptunnel ge1 qosmap 1 4 -Q 28 -P 7
switch:admin> portcfg fciptunnel ge1 qosmap 1 4 -P 2
switch:admin> portcfg fciptunnel ge1 qosmap 1 -default
switch:admin> portcfg fciptunnel8/ge0 create 1 192.168.10.1 192.168.20.1 0 -m 20 -v 100 -p 3 -P 7
Operation Succeeded
switch:admin> portcfg fciptunnel8/ge0 modify 1 192.168.10.1 192.168.20.1 0 -m 20 -v 100
switch:admin> portcfg fciptunnel 3/ge0 create 6 10.1.1.44 192.168.131.124 155000 -f -t
switch:admin> portcfg fciptunnel ge1 modify 0 -f 1
switch:admin> portcfg fciptunnel ge0 create 0 90000 -f -bstr
switch:admin> portcfg fciptunnel ge0 modify 0 -bstr 1
2
portCfg
595