Fanenable - Brocade Communications Systems 1606 Command Reference Manual

fanEnable

Enables a fan unit.
Synopsis fanenable unit
Description Use this command to set a previously disabled fan unit back to the default RPM speed.
Notes This command is not available on non-bladed systems except for the Brocade 4100, 4900, and
5300.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
unit
Examples To enable a fan unit:
See Also fanDisable, fanShow
Fabric OS Command Reference
53-1001337-01
Specify the fan unit number to enable.
switch:admin> fanenable 1
Fan unit 1 has been enabled
2
fanEnable
223