Memshow - Brocade Communications Systems 1606 Command Reference Manual

memShow

Displays the amounts of free and used memory in a switch.
Synopsis memshow [-b | -k | -m]
Description Use this command to display free and used memory in the switch, as well as the shared memory
and buffers used by the kernel.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
-b
-k
-m
Examples To view the memory usage:
See Also supportSave
Fabric OS Command Reference
53-1001337-01
Specify to display memory usage in bytes.
Specify to display memory usage in kilobytes.
Specify to display memory usage in megabytes. By default, memory usage is
displayed in bytes.
switch:admin> memshow
total
Mem: 129740800 112562176
Swap: 0
switch:admin> memshow -m
total
Mem: 123
Swap: 0
used free shared
17178624
0 0
used free shared
107 16
0 0
memShow
buffers cached
0 139264 30396416
buffers cached
0 0
2
28
479