Nsaliasshow - Brocade Communications Systems 1606 Command Reference Manual

2

nsAliasShow

nsAliasShow
Displays local Name Server (NS) information, with aliases.
Synopsis nsaliasshow [-r -t]
Description Use this command to display local name server information with the added feature of displaying
the defined configuration aliases to which the device belongs.
The following message is displayed if there is no information in this switch:
The command nsAllShow displays information from all switches.
The display resulting from this command is identical to the command nsShow, with the exception of
an additional line listing the aliases to which the device belongs. If there are no defined
configuration aliases for that device, no alias is displayed.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
-r
-t
498
There is no entry in the Local Name Server
Replaces the time-to-live (TTL) attribute output in the display with state
change registration (SCR) information in the display. This value indicates
what type of registered state change notification (RSCN) a device registers to
receive. Values include:
SCR=0 Reserved.
SCR=1 Fabric detected registration. Register to receive all RSCN requests issued by
the fabric controller for events detected by the fabric.
SCR=2 NX_Port detected registration. Register to receive all RSCN requests issued
for events detected by the affected NX_Port.
SCR=3 Register to receive all RSCN requests issued. The RSCN request returns all
affected N_Port_ID pages.
Displays the device type. Of the two device type parts, the first part indicates
the origination of the device. Currently, four originations are defined:
•
Physical - Device connected to the NX_Port, using FLOGI to log in to the
switch.
•
Virtual - Contrived device by the switch.
•
NPV - Device connected to the NX_Port, using FDISC to log in to the
switch.
•
iSCSI - Device connected to the iSCSI port.
Fabric OS Command Reference
53-1001337-01