Cfgsize - Brocade Communications Systems 1606 Command Reference Manual

2

cfgSize

cfgSize
Displays zone and Admin Domain database size details.
Synopsis cfgsize [integer]
Description Use this command to display the size details of the zone database and the Admin Domain
database.
When executed in non-AD255 context, the size details include the Zone DB maximum size, the
committed size, and the transaction size. All sizes are in bytes.
When executed in AD255 context, this command displays Admin Domain and Zone DB maximum
size, Admin Domain header size, and the zone database sizes for each Admin Domain:
Zone DB maximum size
Committed size
Transaction size
Refer to cfgShow for a description of defined and effective zone configurations. Refer to ad for a
description of defined and effective Admin Domain configurations.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
In order to support non-disruptive Hot Code Load on a Brocade 5100 with Virtual Fabrics enabled,
the total zoning DB size for the entire chassis should not exceed 1MB.
Operands The following operand is optional:
integer
Examples To display zone database information in non-AD255 context:
88
Defines the upper limit for both zone and Admin Domain defined
configuration, determined by the amount of nonvolatile memory available for
storing the defined configuration. The Zone DB maximum size is further
reduced due to a message header that is propagated with the zone
configuration to all switches in the fabric.
Displays the size of the defined configuration currently stored in nonvolatile
memory.
Displays the size of the uncommitted defined configuration. This value will be
nonzero if the defined configuration is being modified by Telnet, API, and so
forth; otherwise it is 0.
If a nonzero integer is specified, the size of the nonvolatile memory allocated
for the zone database is displayed. The zone database includes both the
defined and effective configurations. This size is displayed in bytes.
switch:admin> cfgsize
Zone DB max size - 1045274 bytes
committed - 244
transaction - 0
Fabric OS Command Reference
53-1001337-01