Brocade Communications Systems 1606 Command Reference Manual page 676

2
portCmd
Examples To verify if packets can be sent to the destination IP address with maximum wait_time specified:
To trace the IP router hops used to reach the remote (with packet size specified):
To verify if packets can be sent to the destination IP address using VLAN tagging with the -c option.
To trace the IP router hops used to reach the remote host using VLAN tagging with the -c option.
To set the path characteristic to source mode on the remote host using VLAN tagging with the -c
option.
To create a TPerf data sink on VE_Port 16:
To configure a TPerf data source that generates round-trip high, medium, and low priority traffic
with a fixed PDU size of 400 bytes. The payload pattern is a jitter pattern and the checksum is
checked by the sink:
646
switch:admin> portcmd --ping 12/ge0 -s 2007:7:30:32:227:138:10:120 -d \
2007:7:30:32:227:77:0:60 -w 29000
Pinging 2007:7:30:32:227:77:0:60 from ip interface 2007:7:30:32:227:138:10:120
on 12/ge0 with 64
bytes of data
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=1ms ttl=255
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255
Ping Statistics for 2007:7:30:32:227:77:0:60:
Packets: Sent = 4, Received = 4, Loss = 0 ( 0 percent loss)
Min RTT = 0ms, Max RTT = 1ms Average = 0ms
switch:admin> portcmd --traceroute 12/ge0 -s 2007:7:30:32:227:138:10:120 -d
2007:7:30:32:227:77:0:60 -z 1452
Traceroute to 2007:7:30:32:227:77:0:60 from IP interface
2007:7:30:32:227:138:10:120 on 12/0, 30
hops max
1 1 ms 0 ms 0 ms
Traceroute complete.
switch:admin> portcmd --ping 8/ge0 –s 192.168.10.1 –d 192.168.20.1 –v 10 –c 3
switch:admin> portcmd --traceroute 8/ge0 –s 192.168.10.1 –d 192.168.20.1 –v 10
switch:admin> portcmd --ipperf 8/ge0 –s 192.168.10.1 –d 192.168.20.1 –S –v 10 –c 3
switch:admin> portcmd --tperf 16 -sink
TPerf has been configured successfully for 16
TPerf is servicing requests on 16
TPerf is servicing requests on 16
TPerf is servicing requests on 16
Tperf data source can now be started
switch:admin> portcmd --tperf 16 -source -size 400 -crc -pattern 5
TPerf has been configured successfully for 16
TPerf is generating traffic on 16
TPerf is generating traffic on 16
priority: high
priority: medium
priority: low
priority: high
priority: medium
Fabric OS Command Reference
53-1001337-01