Brocade Communications Systems 1606 Command Reference Manual page 45

-m mode
Examples To enable AD5:
To enable AD_13:
To add new device members to AD1:
To apply all changes made to the Admin Domain configurations since
To clear all Admin Domain definitions:
To create an Admin Domain with a mix of D,PI, WWNs, and zone alias device members (two
different methods shown):
To create an Admin Domain with two switches identified by domain ID and switch WWN:
To create an Admin Domain with a device list and a switch list:
Fabric OS Command Reference
53-1001337-01
Specifies the mode in which Admin Domain configuration information is
displayed. This operand is valid only with --show and --validate. Valid
values for mode include:
0 Displays the Admin Domain configuration in the current transaction buffer.
1 Displays the Admin Domain configuration stored in persistent memory
(defined configuration).
2 Displays the currently enforced Admin Domain configuration currently
enforced (effective configuration).
switch:admin> ad --activate 5
You are about to activate a new admin domain.
Do you want to activate '5' admin domain (yes, y, no, n): [no] y
switch:admin> ad --activate AD_13
switch:admin> ad --add AD1, -d "100,5; 4,1"
switch:admin> ad --apply
You are about to enforce the saved AD configuration.
This action will trigger ad --apply to all switches in the fabric.
Do you want to apply all admin domains (yes, y, no, n): [no] y
switch:admin> ad --clear
You are about to delete all ADs definitions.
This operation will fail if zone configurations exists in AD1-AD254
Do you want to clear all admin domains (yes, y, no, n): [no] y
switch admin> ad --create "AD1", -d "100,5; 1,3; 20:00:00:e0:8b:05:4d:05"
switch admin> ad --create 1, -d "100,5; 1,3; 21:00:00:e0:8b:05:4d:05"
switch:admin> ad --create "AD1", -s "100; 10:00:00:60:69:80:59:13"
switch:admin> ad --create "AD1", -d "100,5; 1,3; 21:20:00:00:e0:8b:05:4d:05" -s "100;
10:00:00:60:69:80:59:13"
2
ad
apply was last executed:
--
15