6 Installing UnixWare
This section discusses installation issues related to the UnixWare operating systems
(UnixWare 7.1.1). For a successful installation, study the SCO UNIX system manuals thoroughly.
The required Intel RAID Controller SRCU31 disks can be created from the Intel RAID Controller
SRCU31 system CD-ROM.
General Installation Notes
This section identifies the minimum hardware and software required to successfully install the Intel
RAID Controller SRCU31 the accompanying RAID Software Suite.
Minimum Hardware Requirements
•
Computer with CD-ROM drive (not attached to the Intel RAID Controller SRCU31).
Computer must be on the supported hardware list (for example, Intel server board STL2). For a
supported list refer to:
http://support.intel.com/support/motherboards/server/
•
One 32-bit, 33 MHz PCI compatible slot
•
PCI 2.2 compliant System BIOS
•
SCSI hard disk drive(s) (the minimum required to meet the desired RAID level)
Minimum Software Requirements
•
RAID Software Suite CD-ROM
•
20 MB of hard disk drive space
•
RAID Driver Installation Diskette for UnixWare
•
SCO UnixWare 7.1 OS software
71