MACROMEDIA BREEZE-USING THE BREEZE MANAGER Use Manual page 32

To change a group name or description:
Click the Users tab at the top of the Breeze Manager window.
1.
Navigate to the group whose name or properties you want to change.
2.
If the list of users and groups is long, select Groups Only from the Show pop-up menu. For
more information on navigating, see
Click the group name.
3.
The Group Information page for the group appears.
Do one of the following:
4.
Click the Edit Information link in the navigation trail.
■
Click the Edit link next to Group Information in the green bar.
■
The Edit Information page appears.
Edit the group name or description.
5.
Click the Save button.
6.
Adding members to a group
If you are an account administrator, you can add both users and groups to a group.
To add members to a group:
Click the Users tab at the top of the Breeze Manager window.
1.
Navigate to the group to which you want to add members.
2.
If the list of users and groups is long, select Groups Only from the Show pop-up menu. For
more information on navigating, see
Click the group name.
3.
The Group Information page for the group appears.
Click the Edit Group Membership link in the navigation trail.
4.
The Edit Group Membership page appears.
Select the check boxes next to the users and groups that you want to add.
5.
Note: If a user is already a group member, their check box is already selected.
To add the selected users and groups to the group, click the Save button.
6.
Note: After you add a user or group to the group on this page, you cannot immediately remove it.
You must finish adding members and then remove the user or group afterward. See
members from a group" on page
The Group Information page appears.
Removing members from a group
If you are an account administrator, you can remove any members from a group.
32 Chapter 2: Managing Users and Groups
"Navigating users and group lists" on page
"Navigating users and group lists" on page
32.
24.
24.
"Removing