When Paper Misfeeds; Misfeed Location Indicators; Cautions; Removal Procedures - Kyocera KM-1530 Instruction Handbook Manual

CHAPTER 8 WHEN A PROBLEM OCCURS

2. When paper misfeeds

If a paper misfeed occurs, copying will stop. The Misfeed indicator flashes and a misfeed location indicator lights. Also, "J" and a 2-digit number or
"PF" appears on the copy quantity display. The number indicates the paper misfeed location. Remove the misfed paper by referring to "(3) Removal
procedures", with the main switch in the ON (|) position.

(1) Misfeed location indicators

1 1 1 Misfeed in paper feed section
1 1
2 2 2 Misfeed in left cover (page 8-4) 2 2
3 3 3 Misfeed in DF <optional> (page 8-5) 3 3
4 4 Misfeed in drawer <optional> (page 8-5) 4
4 4

(2) Cautions

WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient
care when working in this area, as there is a danger of
getting burned.
* Do not reuse misfed paper.
* If paper is torn during removal, be sure to remove all loose scraps
from inside the copier, or they could cause misfeed later.
* After misfed paper has been removed, warm-up will begin. The
Misfeed indicator will turn off and the copier will return to the same
settings prior to the misfeed.
8-3

(3) Removal procedures

1 Misfeed in paper feed section 1 1 1 1
Misfeed in drawer (J10, J20)
If the misfeed location indicator shown in the illustration below
lights while using the drawer, a misfeed has occurred in the drawer.
Remove the misfed paper using the procedure given below.
1
Open the drawer.