Verifying the Phone Startup Process
Verifying the Phone Startup Process
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
3-12
After the Cisco Unified IP Phone has power connected to it, the phone begins its
startup process by cycling through these steps.
These buttons flash on and off in sequence:
1.
Mute.
–
Speaker.
–
Line 1 (amber)
–
2.
The phone screen displays the Cisco Systems, Inc., logo screen.
These messages appear as the phone starts:
3.
Verifying load (if the phone load does not match the load on the TFTP
–
server). If this message appears, the phone start up again and repeats step
1 and 2 above. The phone also displays the download progress and names
of files it downloads and upgrades.
Configuring IP.
–
Updating CTL.
–
Updating Locale.
–
–
Configuring CM List.
Registering.
–
The main phone screen displays:
4.
Current date and time
–
Primary directory number
–
Additional directory numbers and speed dial numbers, if configured
–
Softkeys
–
If the phone successfully passes through these stages, it has started up properly.
If the phone does not start up properly, see the
section on page
9-2.
Chapter 3
Setting Up the Cisco Unified IP Phone
"Resolving Startup Problems"
OL-12457-01