Network Configuration Menu - Cisco 7931G - Unified IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Note
Table 4-13 Network Configuration Menu Options
Option Description
Load Server Used to optimize installation time for
phone firmware upgrades and offload the
WAN by storing images locally, negating
the need to traverse the WAN link for
each phone's upgrade.
You can set the Load Server to another
TFTP server IP address or name (other
than the TFTP Server 1 or TFTP Server
2) from which the phone firmware can be
retrieved for phone upgrades. When the
Load Server option is set, the phone
contacts the designated server for the
firmware upgrade.
Note
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
The phone also has a Network Configuration menu that you access directly from
the Settings menu. For information about the options on that menu, see the
"Network Configuration Menu" section on page
The Load Server option allows
you to specify an alternate TFTP
server for phone upgrades only.
The phone continues to use TFTP
Server 1 or TFTP Server 2 to
obtain configuration files. The
Load Server option does not
provide management of the
process and of the files, such as
file transfer, compression,
deletion, and so on.
Device Configuration Menu
4-7.
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
4-31