Cisco 7931G - Unified IP Phone VoIP Administration Manual page 109

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-8 Media Configuration Menu Options (continued)
Option Description
Recording Tone Indicates the length of time in
Duration milliseconds that the beep tone plays. If
the value that you configure here is less
than one third of the interval, this value
overrides the default value that is
provided by the Network Locale.
Range: 0 to 3000
Note
See also:
Wideband Indicates whether wideband is enabled or
Headset disabled for the headset.
Default: Disabled
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
For some Network Locales that
use a complex cadence, this
setting applies only to the first
beep tone.
Recording Tone in this table.
Device Configuration Menu
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
If Wideband Headset UI Control is
•
enabled, you or the user can set this
value from the Settings menu on the
phone by choosing
User Preferences > Audio
Preferences > Wideband Headset.
If Wideband Headset UI Control is
•
disabled, set this value from Cisco
Unified Communications Manager
Administration by choosing Device
> Phone > Phone Configuration.
Note Note If you allowed this option
to be user controllable (in the
Wideband Headset UI Control
option), the user-configured
value takes precedence.
4-25