Cisco 7931G - Unified IP Phone VoIP Administration Manual page 94

For cisco unified communications manager 6.0
Hide thumbs Also See for 7931G - Unified IP Phone VoIP:
Table of Contents

Advertisement

Network Configuration Menu
Table 4-2
Network Configuration Menu Options (continued)
Option
Description
TFTP Server 1
Primary Trivial File Transfer Protocol
(TFTP) server used by the phone. If you
are not using DHCP in your network and
you want to change this server, you must
use the TFTP Server 1 option.
If you set the Alternate TFTP option to
yes, you must enter a non-zero value for
the TFTP Server 1 option.
If neither the primary TFTP server nor
the backup TFTP server is listed in the
CTL file on the phone, you must unlock
the CTL file before you can save changes
to the TFTP Server 1 option. In this case,
the phone will delete the CTL file when
you save changes to the TFTP Server 1
option.
For information about the CTL file, refer
to Cisco Unified Communications
Manager Security Guide. For
information about unlocking the CTL
file, see the
Menu" section on page
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
4-10
Chapter 4
"Security Configuration
4-35.
Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock the CTL file, if necessary.
1.
If DHCP is enabled, set the Alternate
2.
TFTP option to Yes.
Scroll to the TFTP Server 1 option,
3.
press the Edit softkey, and then enter
a new TFTP server IP address.
Press the Validate softkey, and then
4.
press the Save softkey.
OL-12457-01

Advertisement

Table of Contents
loading

Table of Contents