Cisco 7931G - Unified IP Phone VoIP Administration Manual page 137

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Group call Allows a user to answer a call ringing on a
pickup phone in another group by using a group
pickup code.
Hold Allows users to move connected calls from
an active state to a held state.
Hold Reversion Limits the amount of time that a call can be
on hold before reverting to the phone that put
the call on hold and alerting the user.
Reverting calls are distinguished from
incoming calls by a single ring (or beep,
depending on the new call indicator setting
for the line). This notification repeats at
intervals if not resumed.
A call that triggers Hold Reversion also
displays an animated icon in the call bubble
and a brief message on the status line.
You can configure call focus priority to favor
incoming or reverting calls.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Pickup Group Configuration"
chapter.
Cisco Unified Communications
•
Manager System Guide, "Call
Pickup" chapter.
Requires no configuration, unless you
want to use music on hold; see
"Music-on- hold" in this table for
information.
Also see "Hold Reversion"
table for related information
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide, "Hold
Reversion" chapter.
in this
5-11