Network Statistics Screen - Cisco 7931G - Unified IP Phone VoIP Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-2 Status Messages on the Cisco Unified IP Phone 7931G (continued)
Message
Version error
XmlDefault.cnf.xml,
or .cnf.xml
corresponding to the
phone device name

Network Statistics Screen

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Description
The name of the phone load
file is incorrect.
Name of the configuration file. None. This is an informational message
The Network Statistics screen displays information about the phone and network
performance. Table 7-3
To display the Network Statistics screen, take either of these actions:
If the phone is registered with Cisco Unified Communications Manager, press
•
the Application Menu button, then choose Settings > Status >
Network Statistics.
By default, the Application Menu button is line button 24 (the top left line
button).
If the phone is not registered with Cisco Unified Communications Manager,
•
press the Settings softkey and then choose Status > Network Statistics.
This softkey appears only when the phone is not registered.
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the
Clear softkey.
To exit the Network Statistics screen, press the Exit softkey.
Table 7-3 Network Statistics Message Components
Item
Rx Frames
Tx Frames
Rx Broadcasts
Possible Explanation and Action
Make sure that the phone load file has the
correct name.
indicating the name of the configuration file
for the phone.
describes the information that appears in this screen.
Description
Number of packets received by the phone
Number of packets sent by the phone
Number of broadcast packets received by the phone
Status Menu
7-13