Verifying The Phone Startup Process - Cisco 7960G Administration Manual

Verifying the Phone Startup Process

Verifying the Phone Startup Process

Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
3-12
After the Cisco IP Phone has power connected to it, the phone begins its startup
process by cycling through the following steps.
These buttons flash on and off in sequence:
1.
Headset
–
Mute
–
Speaker
–
2. The LCD screen displays the Universal Application Loader screen.
These messages and information appear as the phone starts up:
3.
Configuring VLAN
–
Configuring IP
–
Requesting Configuration
–
TFTP CTLFile.tlv
–
TFTP SEPmacaddress.cnf.xml
–
Booting SEP Protocol
–
TFTP imagename.loads
–
Configuring VLAN
–
Configuring IP
–
Configuring CM List
–
Connecting
–
– Registering
Requesting Template
–
The main LCD screen displays:
4.
Current date and time
–
Primary directory number
–
Softkeys
–
If the phone successfully passes through these stages, it has started up properly.
If the phone does not start up properly, see the
section on page 8-2.
Chapter 3 Setting Up the Cisco IP Phone
"Resolving Startup Problems"
OL-4825-01