Cisco 7931G - Unified IP Phone VoIP Administration Manual page 48

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-6 Checklist for Configuring the Cisco Unified IP Phone 7931G in Cisco Unified
Communications Manager (continued)
Task
4. Add and configure directory
numbers (lines) on the phone by
completing these required fields
in the Directory Number
Configuration window.
Directory number(s)
•
Partition
•
Multiple Calls and Call
•
Waiting
Call Forwarding and Pickup
•
(if used)
Voice Messaging (if used)
•
5. Customize softkey templates. Adds, deletes, or changes order
6. Configure speed-dial buttons
and assign speed-dial numbers
(optional).
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
1-30
Purpose
Adds primary and secondary
directory numbers and features
associated with directory
numbers to the phone.
of softkey features that display
on the phone.
Adds speed-dial buttons and
numbers.
Users can change
Note
speed-dial settings on
their phones by using
Cisco Unified
Communications
Manager User Options.
Chapter 1 An Overview of the Cisco Unified IP Phone
For More Information
Refer to Cisco Unified
Communications Manager
Administration Guide:
"Cisco Unified IP Phone
•
Configuration" chapter
"Directory Number
•
Configuration" chapter
"Creating a Cisco Unity
•
Voice Mailbox" section.
See the "Telephony Features
Available for the Phone" section
on page 5-2.
Refer to Cisco Unified
Communications Manager
Administration Guide,
"Softkey Template
Configuration" chapter.
See the "Configuring Softkey
Templates" section on
page 5-21.
Refer to Cisco Unified
Communications Manager
Administration Guide, "Cisco
Unified IP Phone
Configuration" chapter,
"Configuring Speed-Dial
Buttons" section.
OL-12457-01