Cisco 7931G - Unified IP Phone VoIP Administration Manual page 183

For cisco unified communications manager 6.0
Hide thumbs Also See for 7931G - Unified IP Phone VoIP:
Table of Contents

Advertisement

Chapter 7
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-5
Item
Rcvr Codec
Sender Codec
Rcvr Size
Sender Size
Rcvr Packets
Sender Packets
Avg Jitter
Max Jitter
Rcvr Discarded
Rcvr Lost Packets
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Call Statistics
Description
Type of audio encoding used for the received stream.
Type of audio encoding used for the transmitted
stream.
RTP packet size, in milliseconds, for the received
stream.
RTP packet size, in milliseconds, for the transmitted
stream.
Total number of RTP data packets received by the
phone since starting receiving data on this
connection. Includes packets received from different
sources if this is a multicast call. The value displays
as 0 if the connection was set to send-only mode.
Total number of RTP data packets transmitted by the
phone since starting this connection. The value is 0
if the connection is set to receive only mode.
Estimate of mean deviation of the RTP data packet
inter-arrival time, measured in milliseconds. The
value displays as 0 if the connection was set to
send-only mode.
Maximum value of instantaneous jitter, in
milliseconds.
RTP packets received from network but discarded
from jitter buffers.
Total number of RTP data packets that have been lost
since starting receiving data on this connection.
Defined as the number of expected packets less the
number of packets actually received, where the
number of received packets includes any that are late
or duplicate. The value displays as 0 if the
connection was set to send-only mode.
Status Menu
7-17

Advertisement

Table of Contents
loading

Table of Contents