How Users Access A Voice Messaging System - Cisco 7931G - Unified IP Phone VoIP Administration Manual

How Users Access a Voice Messaging System

How Users Access a Voice Messaging System
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
A-4
Make sure to provide end users with the following information about the Cisco
Unified CM User Options web pages:
The URL required to access the application. This URL is:
•
http://server_name/CCMUser/, where server_name is the host on which the
web server is installed.
• A user ID, default password, and default PIN are needed to access the
application.
These settings correspond to the values you entered when you added the user
to Cisco Unified Communications Manager (see the
Unified Communications Manager" section on page
A brief description of what a web-based, graphical user interface application
•
is, and how to access it with a web browser.
An overview the tasks that users can accomplish using the web page.
•
You can also refer users to Cisco Unified IP Phone 7931G Guide, which is
available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_
series_home.html
Cisco Unified Communications Manager lets you integrate with many different
voice mail messaging systems, including the Cisco Unity voice messaging
system. Because you can integrate with a variety of systems, you must provide
users with information about how to use your specific system.
You should provide this information to each user:
How to access the voice mail messaging system account.
•
Make sure that you have used Cisco Unified Communications Manager to
configure the Messages button on the Cisco Unified IP Phone.
Initial password for accessing the voice messaging system.
•
Make sure that you have configured a default voice messaging system
password for all users.
How the phone indicates that voice messages are waiting.
•
Appendix A Providing Information to Users Via a Website
"Adding Users to Cisco
5-23).
OL-12457-01