Cisco 7931G - Unified IP Phone VoIP Administration Manual page 63

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Adding Phones to the Cisco Unified Communications
Manager Database
Table 2-4 Methods for Adding Phones to the Cisco Unified Communications Manager
Database
Method
Auto-registration
Auto-registration with TAPS
Using Cisco Unified
Communications Manager
Administration
Using BAT
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Adding Phones to the Cisco Unified Communications Manager Database
Before installing the Cisco Unified IP Phone, you must choose a method for
adding phones to the Cisco Unified Communications Manager database. These
sections describe the methods:
Adding Phones with Auto-Registration, page 2-12
•
Adding Phones with Auto-Registration and TAPS, page 2-13
•
• Adding Phones with Cisco Unified Communications Manager
Administration, page 2-14
Adding Phones with BAT, page 2-14
•
Table 2-4 provides an overview of these methods for adding phones to the
Cisco Unified Communications Manager database.
Requires MAC
Address?
No
No
Yes
Yes
Notes
Results in automatic assignment of directory
numbers.
Not available when security or encryption is
enabled.
Requires auto-registration and the Bulk
Administration Tool (BAT); updates the Cisco
Unified Communications Manager database with
the MAC address and DNs for the device when user
calls TAPS from the phone.
Requires phones to be added individually.
Can add groups of same model of phone.
Can schedule when phones are added to the Cisco
Unified Communications Manager database.
2-11