Security Configuration Menu - Cisco 7931G - Unified IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Note
Table 4-11 Security Configuration Menu Options
Option Description
PC Port Indicates whether the access port on the
Disabled phone is enabled or disabled.
Note
GARP Enabled Indicates whether the phone learns MAC
addresses from Gratuitous Address
Resolution Protocol (ARP) responses.
Disabling the phone's ability to accept
Gratuitous ARP will prevent applications
that use this mechanism to monitor and
record voice streams from working. If
voice monitoring is not desired, set this
option to No (disabled).
Voice VLAN Indicates whether the phone allows a
Enabled device attached to the access port to
access the Voice VLAN. Setting this
option to No (disabled) prevents the
attached PC from sending and receiving
data on the Voice VLAN. This setting
also prevents the PC from receiving data
sent and received by the phone. Set this
setting to Yes (enabled) if an application
that requires monitoring of the phone
traffic is running on the PC. These
applications include monitoring and
recording applications and network
monitoring software.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
The phone also has a Security Configuration menu that you access directly from
the Settings menu. For information about the security options on that menu, see
the see the "Security Configuration Menu" section on page
If disabled, video will not work
on this phone, even if video is
enabled.
Device Configuration Menu
4-35.
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
4-29