Cisco 7931G - Unified IP Phone VoIP Administration Manual page 130

Telephony Features Available for the Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Barge Allows a user to join a non-private call on a
shared phone line. Barge features include
cBarge and Barge.
•
•
The phones support Barge in two conference
modes:
•
•
Note
Block external Prevents users from transferring an external
to external call to another external number.
transfer
Busy Lamp Allows a user to monitor the call state of a
Field (BLF) directory number (DN) that is associated
speed dial with a speed-dial button.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
5-4
cBarge adds a user to a call and converts
it into a conference, allowing the user
and other parties to access conference
features.
Barge adds a user to a call but does not
convert the call into a conference.
Built-in conference bridge at the target
device (the phone that is being barged).
This mode uses the Barge softkey.
Shared conference bridge. This mode
uses the cBarge softkey.
This feature may not be available,
depending on how you configure the
phone. For more information, see the
"Configuring Model-Specific
Features" section on page
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Cisco Unified IP Phone
Configuration" chapter.
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Features and Services
Guide, "Barge and Privacy"
chapter.
5-25.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide,
"External Call Transfer Restrictions"
chapter.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide,
"Presence" chapter.
OL-12457-01