Managing The Cisco Unified Cm User Options Web Pages; Giving Users Access To The Cisco Unified Cm User Options Web Pages - Cisco 7931G - Unified IP Phone VoIP Administration Manual

Managing the Cisco Unified CM User Options Web Pages

Managing the Cisco Unified CM User Options Web
Pages
Giving Users Access to the Cisco Unified CM User Options Web
Pages
Specifying Options that Appear on the Cisco Unified CM User
Options Web Pages
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
5-24
From the Cisco Unified CM User Options web page, users can customize and
control several phone features and settings. For detailed information about the
User Options web pages, refer to Cisco Unified IP Phone 7931G for Cisco Unified
Communications Manager 6.0.
Before a user can access the Cisco Unified CM User Options web pages, you must
use Cisco Unified Communications Manager Administration to add the user to a
standard Cisco Unified Communications Manager end user group. To do so,
choose User Management > User Group. You must also associate appropriate
phones with the user. To perform these procedures, from Cisco
Unified Communications Manager Administration, choose User Management >
End User.
For additional information, refer to Cisco Unified Communications Manager
Administration Guide, "End User Configuration" section.
Most options on the Cisco Unified CM User Options web pages appear by default.
However, two options that do not appear by default are:
Show Ring Settings
•
Show Line Text Label Settings
•
You can control the options that appear on the User Options web pages by using
enterprise parameter settings in Cisco Unified Communications Manager
Administration.
Chapter 5 Configuring Features, Templates, Services, and Users
OL-12457-01