Status Messages Screen - Cisco 7931G - Unified IP Phone VoIP Administration Manual

Status Menu

Status Messages Screen

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
7-4
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
To display the Status menu, take either of these actions:
If the phone is registered with Cisco Unified Communications Manager, press
•
the Application Menu button, then choose Settings > Status.
By default, the Application Menu button is line button 24 (the top left line
button).
• If the phone is not registered with Cisco Unified Communications Manager,
press the Settings softkey and then choose Status.
This softkey appears only when the phone is not registered.
To exit the Status menu, press the Exit softkey.
The Status Messages screen displays up to the 10 most recent status messages that
the phone has generated. You can access this screen at any time, even if the phone
has not finished starting up.
appear. This table also includes actions you can take to address errors that are
indicated.
To display the Status Messages screen, take either of these actions:
• If the phone is registered with Cisco Unified Communications Manager, press
the Application Menu button, then choose Settings > Status >
Status Messages.
By default, the Application Menu button is line button 24 (the top left line
button).
If the phone is not registered with Cisco Unified Communications Manager,
•
press the Settings softkey and then choose Status > Status Messages.
This softkey appears only when the phone is not registered.
To remove current status messages, press the Clear softkey.
To exit the Status Messages screen, press the Exit softkey.
Table 7-2 describes the status messages that might
OL-12457-01