Adding Phones With Auto-Registration And Taps - Cisco 7931G - Unified IP Phone VoIP Administration Manual

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Determining the MAC Address of a Cisco
Unified IP Phone
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
For information about determining a MAC address, see the
MAC Address of a Cisco Unified IP Phone" section on page
For detailed instructions about using BAT, refer to Cisco Unified Communications
Manager Administration Guide and to Cisco Unified Communications Manager
Bulk Administration Guide.
Related Topics
Adding Phones with Auto-Registration, page 2-12
•
Adding Phones with Auto-Registration and TAPS, page 2-13
•
Adding Phones with Cisco Unified Communications Manager
•
Administration, page 2-14
Several of the procedures that are described in this manual require you to
determine the MAC address of a Cisco Unified IP Phone. You can determine the
MAC address for a phone in any of these ways:
If the phone is registered with Cisco Unified Communications Manager, press
•
the Application Menu button, then choose Settings > Model Information
and look at the MAC Address field.
By default, the Application Menu button is line button 24 (the top left line
button).
If the phone is not registered with Cisco Unified Communications Manager,
•
press the Settings softkey, the choose Model Information and look at the
MAC Address field.
This softkey appears only when the phone is not registered.
Look at the MAC label on the back of the phone.
•
Display the web page for the phone and click the Device Information
•
hyperlink.
For information about accessing the web page, see the
Page for a Phone" section on page
Determining the MAC Address of a Cisco Unified IP Phone
8-2.
"Determining the
2-15.
"Accessing the Web
2-15