Cisco 7931G - Unified IP Phone VoIP Administration Manual page 98

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
SW Port Speed and duplex of the network port
Configuration (labeled 10/100 SW). Valid values:
•
•
•
•
•
If the phone is connected to a switch,
configure the port on the switch to the
same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option,
you must change the PC Port
Configuration option to the same setting.
PC Port Speed and duplex of the access port
Configuration (labeled 10/100 PC). Valid values:
•
•
•
•
•
If the phone is connected to a switch,
configure the port on the switch to the
same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option,
you must change the SW Port
Configuration option to the same setting.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
4-14
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock network configuration
1.
options.
Scroll to the SW Port Configuration
2.
option and then press the Edit
softkey.
Scroll to the setting that you want
3.
and then press the Select softkey.
Press the Save softkey.
4.
Unlock network configuration
1.
options.
Scroll to the PC Port Configuration
2.
option and then press the Edit
softkey.
Scroll to the setting that you want
3.
and then press the Select softkey.
Press the Save softkey.
4.
OL-12457-01