Security Configuration Menu - Cisco 7975G Software Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Security Configuration Menu

The Security Configuration menu that you display from the Device Configuration menu displays settings
that relate to security for the phone.
Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For
information about the security options on that menu, see the
page
Table 4-16
Table 4-16 Security Configuration Menu Options
Option
PC Port Disabled
GARP Enabled
Voice VLAN Enabled
Web Access Enabled
Security Mode
Logging Display
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
4-31.
describes the options on the Security Configuration menu.
Description
Indicates whether the access port on the phone is
enabled or disabled.
If disabled, video will not work on this
Note
phone, even if video is enabled.
Indicates whether the phone learns MAC
addresses from Gratuitous Address Resolution
Protocol (ARP) responses. Disabling the
phone's ability to accept Gratuitous ARP will
prevent applications that use this mechanism to
monitor and record voice streams from working.
If voice monitoring is not desired, set this option
to No (disabled).
Indicates whether the phone allows a device
attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting
also prevents the PC from receiving data sent
and received by the phone. Set this setting to Yes
(enabled) if an application that requires
monitoring of the phone's traffic is running on
the PC. These applications include monitoring
and recording applications and network
monitoring software.
Indicates whether web access is enabled (Yes) or
disabled (No) for the phone.
Displays the security mode that is set for the
phone.
For use by the Cisco Technical Assistance Center (TAC), if necessary.
Device Configuration Menu
"Security Configuration Menu" section on
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Use Cisco Unified Communications Manager
Administration to modify.
4-25