Security Configuration Menu - Cisco 7942G Administration Manual

Device Configuration Menu

Security Configuration Menu

The Security Configuration menu that you display from the Device Configuration menu displays settings
that relate to security for the phone.
Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For
information about the security options on that menu, see the
page
Table 4-15
Table 4-15 Security Configuration Menu Options
Option Description
PC Port Disabled Indicates whether the access port on the phone is
enabled (Yes) or disabled (No).
Must be set to enabled for video support on the
phone
GARP Enabled Indicates whether the phone learns MAC
addresses from Gratuitous Address Resolution
Protocol (ARP) responses. Disabling the phone's
ability to accept Gratuitous ARP will prevent
applications that use this mechanism to monitor
and record voice streams from working. If voice
monitoring is not desired, set this option to No
(disabled).
Voice VLAN Indicates whether the phone allows a device
Enabled attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting
also prevents the PC from receiving data sent and
received by the phone. Set this setting to Yes
(enabled) if an application that requires
monitoring of the phone's traffic is running on the
PC. These applications include monitoring and
recording applications and network monitoring
software.
Web Access Indicates whether web access is enabled (Yes) or
Enabled disabled (No) for the phone.
Security Mode Displays the security mode that is set for the
phone.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-22
4-27.
describes the options on the Security Configuration menu.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
"Security Configuration Menu" section on
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Use Cisco Unified Communications Manager
Administration to modify.
OL-17679-01