Setting Up The Tftp Server With Cisco Ata Software; Configurable Features And Related Parameters - Cisco ATA 188 Administrator's Manual

Configuring the Cisco ATA Using a TFTP Server

Setting Up the TFTP Server with Cisco ATA Software

This section provides the procedure for the Cisco ATA administrator to obtain the correct Cisco ATA
software and set up the Cisco CallManager TFTP server with this software.
Procedure
If you are a registered CCO user. go to the following URL:
Step 1
http://www.cisco.com/cgi-bin/tablebuild.pl/ata186
Download the zip file that contains the software for the applicable release and signaling image you are
Step 2
using. The contents of each file are described next to the file name. Save the zip file onto a floppy disc.
Note
Insert the floppy disc into the Cisco CallManager disc drive.
Step 3
From your computer, navigate to Start > Programs > Terminal Services > Client. The Terminal
Step 4
Services Client screen appears.
In the Services field of the Terminal Services Client screen, enter the IP address of the
Step 5
Cisco CallManager that contains the disc you inserted. Then, click the Connect button. The Login
screen appears.
Enter your login information, then click OK. The TFTP Path screen appears.
Step 6
Click on the My Computer icon that is located within the Terminal Services Client screen, then navigate
Step 7
to the A: drive.
From the A: drive, drag the zip file to the TFTP Path screen. This will extract all the files and place them
Step 8
onto the Cisco CallManager TFTP server.

Configurable Features and Related Parameters

Table 3-5
Table 3-5
Each link takes you to a detailed description of the parameter that includes its default values.
For an example of how to configure parameters for the TFTP Server configuration method, see the
"Creating a Cisco ATA Default Configuration File" section on page
Table 3-5
Configurable Features
Audio Media Features
•
•
•
Caller ID format
Debug and Diagnosis
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
3-8
The file that contains the protocol signaling image has an extension of .zup.
lists, in alphabetical order, various features that you can configure for the Cisco ATA.
also includes links to the related parameter that allows you to configure each of these features.
Configurable Features and Related Parameters
Low bit-rate codec selection (G.723.1, G.729)
Silence suppression
RTP media port configuration
Chapter 3 Configuring the Cisco ATA for SCCP
3-10.
Related Parameters
Audio Media Parameters
LBRCodec, page 5-11
•
AudioMode, page 5-12
•
MediaPort, page 5-27
•
CallerIdMethod, page 5-14
NPrintf, page 5-26, TraceFlags, page 5-27
OL-3141-01