Monitoring System Status And Performance - Cisco ASR 5000 Series Administration Manual

▀ Monitoring System Status and Performance

Monitoring System Status and Performance
This section contains commands used to monitor the status of tasks, managers, applications and other software
components in the system. Output descriptions for most of the commands are located in the Counters and Statistics
Reference.
Table 6. System Status and Performance Monitoring Commands
To do this:
View Subscriber Information
Display Session Resource Status
View session resource status
Display Subscriber Configuration Information
View locally configured subscriber profile settings (must be in
context where subscriber resides)
View remotely configured subscriber profile settings
View Subscribers Currently Accessing the System
View a listing of subscribers currently accessing the system
View information for all ggsn-only subscriber sessions
View information for a specific subscriber
View Subscriber Counters
View counters for a specific subscriber
View Recovered Session Information
View session state information and session recovery status
View Session Statistics and Information
Display Historical Session Counter Information
View all historical information for all sample intervals
Display Session Duration Statistics
View session duration statistics
Display Session State Statistics
View session state statistics
Display Session State PCF Statistics
View session state PCF statistics
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
Enter this command:
show subscribers ggsn-only all
Monitoring the Service
OL-22991-01