Understanding Caller Id Support - Cisco VG248 - Gateway Software Configuration Manual

Chapter 1 Overview
Table 1-1 Overview of Default Feature Access in Call Control Modes (continued)
Basic
Call Waiting
Hook flash to answer
and switch between
calls.
1. When forward all is activated, users hear a distinctive dial tone to indicate that all incoming calls are currently being
forwarded to a different directory number.

Understanding Caller ID Support

OL-1209-02
Standard
Call Waiting
Hook flash to answer and switch
between calls.
Blind Transfer
Call 1, hook flash, call 2, hang up. Call 1, hook flash, #2, call 2, hang up
Supervised Transfer
Call 1, hook flash, call 2, wait for
call 2 to be answered, hang up
Conference
Call 1, hook flash, call 2, hook
flash
If you have activated caller ID on Cisco CallManager, the VG248 can collect that
information and pass it on to analog phones. You can disable caller ID on a per
port basis. This enables you to support caller ID on some analog phones and not
on others (see the "Enabling Caller ID" section on page 3-11
The VG248 supports the following caller ID standards:
• Bellcore GR-30-CORE—North America
ETS 300 648 and ETS 300 659-1—Europe (excluding the United Kingdom)
•
• British Telecom SIN227 and SIN 242—United Kingdom
Cisco VG248 Analog Phone Gateway Software Configuration Guide
Understanding How the VG248 Supports Telephony Features
Feature
Call Waiting
Hook flash to answer and switch
between calls.
Blind Transfer
Supervised Transfer
Call 1, hook flash, call 2, wait for call 2
to be answered, hook flash, #2
Conference
Call 1, hook flash, call 2, hook flash, #3
Hang up Last Call
Call 1, hook flash, call 2, hook flash, #1
Hold
Call 1, hook flash, call 2; hook flash to
toggle
for details).
1-7