Emptying The Hole Punch Waste Container - Xerox WorkCentre WC7530 User Manual

Emptying the Hole Punch Waste Container

This section includes:

Emptying the Hole Punch Waste Container in the Office Finisher LX ......................................................... 179

Emptying the Hole Punch Waste Container in the Professional Finisher .................................................. 180
A message appears on the control panel when the hole punch waste container is full.
Emptying the Hole Punch Waste Container in the Office Finisher LX
WARNING: Do not perform this procedure while the printer is copying or printing.
1. Lift the finisher transport top cover, then open the front transport cover.
2. Pull out the hole punch waste container.
WorkCentre 7500 Series Multifunction Printer
Maintenance
179
User Guide