Xerox WorkCentre WC7530 User Manual page 176

Maintenance
2. Open tray 5 (bypass) as shown (1).
3. While lifting up the release lever (2), open the top left cover A as shown (3).
WARNING: The area around the fuser can be hot. Use caution to avoid injury.
CAUTION: Do not touch the transfer belt. Touching the belt can reduce image quality or damage the
transfer belt. Do not touch the transfer roller. Touching the roller can reduce image quality.
4. Remove the new second bias transfer roll from the packaging. Retain the packaging.
5. Push the orange lever in the direction shown.
176 WorkCentre 7500 Series Multifunction Printer
User Guide
3
1
2