Saving Copy Settings; Retrieving Saved Copy Settings - Xerox WorkCentre WC7530 User Manual

Note: The sample copy is not counted as part of the quantity selected. For example, if you select
three copies, one sample copy prints, and three other copies are held until they are released for
printing. The result is a total of four copies.
To print a sample copy of your copy job:
1. Press the Services Home button, then touch Copy.
2. Touch the desired copy settings.
3. Touch the Job Assembly tab, then touch Sample Job > On.
4. Touch Save.
On the control panel, press the green Start button. The sample copy is printed.
5.
6. Print the remaining copies or delete the job:

To release and print the remaining copies of the job, touch Release.

If the sample copy is unsatisfactory, touch Delete > Delete Job.

Saving Copy Settings

To use a particular combination of copy settings for future copy jobs, you can save the settings with a
name and retrieve them for later use.
To save the current copy settings:
1. Press the Services Home button, then touch Copy.
2. Touch the Job Assembly tab, then touch Save Current Settings.
3. Using the touch screen keyboard, type a name for the saved settings.
Touch Save.
4.

Retrieving Saved Copy Settings

You can retrieve and use any previously saved copy settings for current jobs.
Note: To save the copy settings with a name, see Saving Copy Settings.
To retrieve saved settings:
1. Press the Services Home button, then touch Copy.
2. Touch the Job Assembly tab, then touch Retrieve Saved Settings.
3. Touch the desired saved setting.
Note: To delete a saved setting, touch the setting, then touch Delete Settings.
Touch Load Settings. The saved settings are loaded for the current copy job.
4.
WorkCentre 7500 Series Multifunction Printer
Copying
97
User Guide