Xerox WorkCentre WC7530 User Manual page 186

Maintenance
3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
4. Hold the tabs on both sides of the new staple cartridge and insert it into the original position in the
finisher.
Note: If you have trouble inserting the cartridge, make sure the staples are positioned correctly in the
cartridge.
Note: The Booklet Maker uses two staple cartridges. Booklet stapling requires that both staple
cartridges contain staples.
5. Starting at Step 2, repeat the procedure for the other staple cartridge.
6. Close the side cover of the finisher.
Replacing Staples in the Main Stapler of the Professional Finisher
1. Open the front door of the finisher.
186 WorkCentre 7500 Series Multifunction Printer
User Guide