Xerox WorkCentre WC7530 User Manual page 171

2. Grip the orange handle of the drum cartridge as shown and pull the drum cartridge straight out of
the printer. Place the used drum cartridge in the plastic bag and place in the box.
WARNING:
Do not touch any toner adhering to the drum cartridge.
Note: To return used supplies for recycling, follow the instructions included with the new supplies. If
the instructions or shipping label are not available, go to
information.
3. Remove the packing material from the end of the new drum cartridge.
4. Rest the new cartridge, along with its black plastic protective shield, in the cartridge slot. Make sure
to load the cartridge in the direction of the arrow on the top of the shield.
5. While keeping the guides inserted in the slot, remove the black paper sheet by pulling it in the
direction shown.
6. Remove the tape from the top of the cartridge shield.
7. Hold the shield and push the cartridge into the printer using the orange handle.
www.xerox.com/gwa
WorkCentre 7500 Series Multifunction Printer
Maintenance
for additional
171
User Guide