Basic Copying; Document Glass - Xerox WorkCentre WC7530 User Manual

Copying

Basic Copying

To make copies:
On the control panel, press the yellow Clear All button to clear previous copy settings.
1.
2. Load your original documents:

Use the document glass for single pages or paper that cannot be fed using the document
feeder. Place the first page of the document face down, in the top left corner of the document
glass.

Use the document feeder for multiple or single pages. Remove any staples and paper clips from
the pages and place them face up in the document feeder.
3. Press the Services Home button, then touch Copy.
4. Use the alphanumeric keypad on the control panel to enter the number of copies. The number of
copies appears in the upper right corner of the touch screen.
Note: To correct the number of copies entered using the alphanumeric keypad, press the C button,
then re-enter the number.
5. If desired, change the copy settings. For details, see
6. Press the green Start button.
Notes:

To pause or cancel a copy job, press the red Stop button on the control panel.

To interrupt a copy job, press the Interrupt button on the control panel.

On the touch screen, touch Resume to continue the job, or Cancel to cancel the job completely.

Document Glass

74 WorkCentre 7500 Series Multifunction Printer
User Guide
Selecting Copy Settings

Lift the document feeder cover
and place the first page face
down in the upper left corner of
the document glass.

The original must be aligned to
the matching paper size printed
on the edge of the glass.

The document glass accepts
paper sizes up to 310 x 430 mm
(12.25 x 17 in.).

The document glass
automatically detects standard
paper sizes.
on page 76.