Xerox WorkCentre WC7530 User Manual page 184

Maintenance
2. Reach into the finisher cabinet and pull the stapler toward you until it stops.
3. Push the stapler to the right as shown.
4. Grip the staple cartridge by the orange handle and remove the cartridge by pulling it firmly toward
you.
5. Remove any loose staples or other debris from inside the finisher.
6. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
7. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into
the cartridge (2).
184 WorkCentre 7500 Series Multifunction Printer
User Guide
2
1
1
2
1