Tripod Data Systems CO-OP 41 User Manual page 92

Operation: When executed the CO-OP 41 will move the
plotter pen to the point number that was entered in the X-
Reg. It will then prompt if you want to plot the point
number.
[R/S FOR NUM
Pressing the key will print the point number out
besides the point.
Remarks: If the pen is in the down position then a line
will be drawn to the point as the pen moves there.
Generally you will want to make certain that the pen is in
the up position before executing this function.
VARY TEXT
Name: Vary Text
Purpose: Allows the printing of text on the plotter, from a
text file. Each line printed can be a differentsize.
Keystrokes: [SHIFT] (VARY TEXT]
Entry Conditions: A text file must have previously been
created using the NEW TEXT function. Also the random
point file must contain the size to print each line of text
(LE.if the first number in the random point file is a 6 then
the first line of text will be printed in letter size 6, the
second number in the random point file will determine
the lettering size used on the second line of text, etc..)
Operation: When executed the CO-OP 41 will prompt for
the text file name to print from.
[TEXT NAME? |
84 CO-OP 41 Data Coilector