Tripod Data Systems CO-OP 41 User Manual page 52

Keystrokes:
Entry Conditions: The points to put the calls between
must be stored in the random point file.
Operation: Calls are printed centered between the end
points of the line. When the function is executed the CO-
OP 41 will prompt for the size of the lettering to use on
the calls.
[LETTER SIZE? |
When this is entered the CO-OP 41 will bring up a scroll
menu allowing for the selection of where to place the
calls, and what information to print.
IN/OUT pr
RESUME ~
OUT B/D "
INSIDE DIST "
OUT DIST "
IN/OUT ~~ This selection is for printing the bearing on
the outside of the line, and the distance on the inside.
RESUME ~ If for some reason you have interrupted the
system while you were printing calls and wish to
continue, then select this function. It will prompt for a
point number.
[RESUME PT?
Key in the point number that comes after the last call that
was printed, and the CO-OP 41 will continue printing calls
from that point.
44 CO-OP 41 Data Collector