Moving The Job - Tripod Data Systems CO-OP 41 User Manual

MOVING THE JOB
If you let the CO-OP 41 determine the low north and east
of the plat, your job will usually be off the center of the
paper. You can easily move your job to anywhere on the
paper by one of the following methods:
1.
34
Use the MOVE JOB function. This function allows
you to move a point of your job to a digitized
location and the rest of the points will be moved
accordingly. This function also allows you to move
your job by specifying the north movement and
east movement. Please refer to the MOVE JOB
function in Chapter 4 for more details.
Specify the low north and low east of the plat. This
is an easy way to move the job on the plat. Key in
your own low north and east coordinate instead of
letting the CO-OP 41 find them for you. For
example: Your job is a box made up of the
following points.
POINT # NORTH EAST
1 5,000 5,000
2 5,100 5,000
3 5,100 5,100
4 5,000 5,100
The lowest north-east point for this job is 5,000
5,000. To position the plot of this job closer to the
center of the plat then we give the following
answers:
CO-OP 41 Data Collector