Tripod Data Systems CO-OP 41 User Manual page 60

Operation: When executed the CO-OP 41 will bring up a
scroll menu for the selection of whether you want the pen
in the up, or down position when it is moving (this will
determine if the plotter draws a line or simply moves to
the point without drawing a line).
PEN UP "
PEN DOWN "
PEN UP ~~ The plotter will move to the specified point,
but will not draw a line to it.
PEN DOWN ~~ The plotter will move to the specified
point drawing a line from the current pen position to the
specified point.
When one of these is selected the CO-OP 41 will bring up
scrolling prompts for the entry of information to define
the direction and in which to move the pen.
PT?
:PP PT1?
:BRG?
AZ?
:DEF/?
PT? If you want to go to a know point then key in the
point number and the pen will move to that point.
PP PT1? This is prompting for the first of two points that
will define a line parallel to the one that you want the
plotter pen to move along. If you key in a point number
the CO-OP 41 will prompt for the second known point
that defines the parallel line.
[PT2? |
52 CO-OP 41 Data Collector