Tripod Data Systems CO-OP 41 User Manual page 123

Keystroks: [XEQ] [ALPHA] SAVET [ALPHA]
Operation: First connect the HPIL disc or cassette drive to the
data collector with a pair of HPIL cables.
When this function is executed, ths CO-OP 41 prompts for name of
the text file in the extended memory.
"RDM FILE?"
Enter the file name and prees [R/S]. The CO-OP 41 will try to
create a file in the mass memory device with the same name. If
the file already exist, the CO-OP 41 will display:
"OVER WRT ~"
Press the [ENTER] key to over write it, or press the back arrow
key to abort the function.
Remark: This function can only be used to copy a text file from
the 41's extended memory to a mass memory device. It will not
copy a text file from the data collector's memory to a mass
memory device.
Usually, you would create a text file in the 41's extended memory
by using the "NEW TEXT" function in the plotter module. You can
than execute the "TDC" function to copy the text file to the data
collector's memory. If you also want to save your text file to a
mass memory device, you need to execute the "SAVET" function
while the text file is still in the 41's extended memory.