Tripod Data Systems CO-OP 41 User Manual page 57

[1ST PT?
Name: Degree Character
Purpose: Allows you to change the symbol used as the
degree sign when plotting. This function is used if your
plotter does not print the standard degree sign correctly.
Keystrokes: (ALPHA]JDEGC [ALPHA]
Entry Conditions: Enter with the ASCII character code for
the new degree sign in the X-Reg.
Operation: There are no prompts or displays for this
function. When executed the CO-OP 41 will simply assign
the new character code, given in the X-Reg, to the degree
sign for use when plotting.
Remarks: Some HP plotters will draw the degree sign,
but will not move to the next character so the degree sign
in over-written. On such plotters you can change the
degree sign to a space (Enter with 32 in the X-Reg)
Plotter Module User's Manual 49