Tripod Data Systems CO-OP 41 User Manual page 77

PEN DOWN
Name: Pen Down
Purpose: Puts the pen on the plat.
Keystrokes: [SHIFT] [PEN DOWN]
Entry Conditions: None
Operation: When executed the CO-OP 41 will put the
plotter pen in the down position (against the plat). Any
instructions that are issued after this will cause the pen to
mark on the plat.
PEN HOME
Name: Pen Home
Purpose: Moves the pen to the home position.
Keystrokes: [SHIFT] [PEN HOME]
Entry Conditions: None
Operation: When executed the plotter pen will move the
lowest south west corner of the paper.
PEN SPEED
Name: Pen Speed Select
Purpose: Allows you to change the speed at which the
plotter drawing pen moves.
Keystrokes: [SHIFT] (PEN SPEED]
Plotter Module User's Manual 69